L2+ 10G Ethernet Switch with LCD Touch Screen

Physical Port

  • 24 10/100/1000BASE-T Gigabit RJ45 copper ports with 24-port IEEE 802.3af/at PoE+ injector
  • 4 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
  • RJ45 console interface for switch basic management and setup

Power over Ethernet

  • Complies with IEEE 802.3at Power over Ethernet Plus/end-span PSE
  • Backward compatible with IEEE 802.3af Power over Ethernet
  • Up to 24 ports of IEEE 802.3af/IEEE 802.3at devices powered
  • Supports PoE power up to 36 watts for each PoE port
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100 meters
  • PoE management
  • – Total PoE power budget control- Per port PoE function enable/disable- PoE admin-mode control- PoE port power feeding priority- Per PoE port power limitation- PD classification detection- Temperature threshold control- PD alive check- PoE schedule

Layer 2 Features

  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • High performance of Store-and-Forward architecture and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • Storm Control support
  • – Broadcast/Multicast/Unknown unicast
  • Supports VLAN
  • – IEEE 802.1Q tagged VLAN- Up to 255 VLANs groups, out of 4094 VLAN IDs- Supports provider bridging (VLAN Q-in-Q, IEEE 802.1ad)- Private VLAN Edge (PVE)- Protocol-based VLAN- MAC-based VLAN- Voice VLAN
  • Supports Spanning Tree Protocol
  • – IEEE 802.1D Spanning Tree Protocol- IEEE 802.1w Rapid Spanning Tree Protocol- IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN- BPDU Guard
  • Supports Link Aggregation
  • – 802.3ad Link Aggregation Control Protocol (LACP)- Cisco ether-channel (static trunk)- Maximum 14 trunk groups, up to 4 ports per trunk group- Up to 80Gbps bandwidth (full duplex mode)
  • Provides port mirror (many-to-1)
  • Port mirroring to monitor the incoming or outgoing traffic on a particular port
  • Loop protection to avoid broadcast loops

Physical Port

  • 16 10/100/1000BASE-T Gigabit RJ45 copper ports
  • 2 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
  • RJ45 console interface for switch basic management and setup


Layer 2 Features

  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • High performance of Store-and-Forward architecture and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • Storm Control support
    – Broadcast/Multicast/Unknown unicast
  • Supports VLAN
    – IEEE 802.1Q tagged VLAN
    – Up to 255 VLANs groups, out of 4094 VLAN IDs
    – Supports provider bridging (VLAN Q-in-Q, IEEE 802.1ad)
    – Private VLAN Edge (PVE)
    – Protocol-based VLAN
    – MAC-based VLAN
    – Voice VLAN
  • Supports Spanning Tree Protocol
    – IEEE 802.1D Spanning Tree Protocol
    – IEEE 802.1w Rapid Spanning Tree Protocol
    – IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN
    – BPDU Guard
  • Supports Link Aggregation
    – 802.3ad Link Aggregation Control Protocol (LACP)
    – Cisco ether-channel (static trunk)
    – Maximum 9 trunk groups, up to 2 ports per trunk group
    – Up to 40Gbps bandwidth (full duplex mode)
  • Provides port mirror (many-to-1)
  • Port mirroring to monitor the incoming or outgoing traffic on a particular port
  • Loop protection to avoid broadcast loops
  • Supports ERPS (Ethernet Ring Protection Switching)

L2+ 10G Ethernet Switch

Physical Port

  • 24 10GBASE-SR/LR SFP+ ports, compatible with 1000BASE-SX/LX/BX SFP
  • 2 QSFP+ slots with each supporting native 40G and four 10 Gigabit Ethernet modes.
  • 1 10/100/1000BASE-T RJ45 in-band management port
  • 1 USB2.0 interface for configuration and firmware storage
  • RJ45 console interface for switch basic management and setup

Stacking Features

  • Hardware Stacking
  • – Virtualized multiple XGS-5240-24X2QR switches into one logical device
    – Connects with stack member via assigned 10G SFP+ interfaces or 40G QSFP+ interfaces
    – Single IP address stack management, supporting up to 4 switches stacked together
    – Stacking architecture supports redundancy Ring mode
  • IP Stacking
  • – Connects with stack member via both SFP+ and QSFP+ interfaces
    – Single IP address management, supporting up to 24 units stacked together

IP Routing Features

  • IP routing protocol supports
  • Routing interface provides per VLAN routing mode 
  • Supports route redistribution

Physical Port

  • 16-port 10/100/1000BASE-T RJ45 copper
  • 4 100/1000BASE-X mini-GBIC/SFP slots
  • 2 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
  • RJ45 console interface for basic management and setup

Layer 2 Features

  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • High performance of Store-and-Forward architecture and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • Storm Control support
  • – Broadcast/Multicast/Unknown unicast
  • Supports VLAN
  • – IEEE 802.1Q tagged VLAN- Up to 255 VLANs groups, out of 4094 VLAN IDs- Supports provider bridging (VLAN Q-in-Q, IEEE 802.1ad)- Private VLAN Edge (PVE)- Protocol-based VLAN- MAC-based VLAN- Voice VLAN
  • Supports Spanning Tree Protocol
  • – IEEE 802.1D Spanning Tree Protocol- IEEE 802.1w Rapid Spanning Tree Protocol- IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN- BPDU Guard
  • Supports Link Aggregation
  • – 802.3ad Link Aggregation Control Protocol (LACP)- Cisco ether-channel (static trunk)- Maximum 12 trunk groups, up to 10 ports per trunk group- Up to 20Gbps bandwidth (full duplex mode)
  • Provides port mirror (many-to-1)
  • Port mirroring to monitor the incoming or outgoing traffic on a particular port
  • Loop protection to avoid broadcast loops

L2+ Multi-Gigabit Ethernet Switch

Physical Port

  • 8-Port 100/1000/2500 BASE-T with 30W PoE injector
  • 2-port 1/10 GBASE-X SFP+
  • RS-232 RJ45 console interface for switch basic management and setup

Power over Ethernet

    • Up to 8 ports of IEEE 802.3af/802.3at devices powered
    • Supports PoE Power up to 30.8 watts for each PoE port
    • Auto detects powered device (PD)
    • Circuit protection prevents power interference between ports
    • Remote power feeding up to 100 meters
    • PoE Management
    • – PoE Port Status monitoring
    • – Total PoE power budget control
    • – Over Temperature Protection
    • – PoE usage threshold
    • – Temperature threshold
    • – Per port PoE function enable/disable
    • – PoE Port Power feeding priority
    • – Per PoE port power limit
    • – PD classification detection
  • – Sequence port PoE

Layer 2 Features

    • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
    • High performance of Store-and-Forward architecture and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
    • Storm Control support
    • – Broadcast/Multicast/Unknown unicast
    • Supports VLAN

L2+ Stackable Gigabit Ethernet Switch

Physical Ports

  • 24 10/100/1000BASE-T RJ45 copper ports
  • 4 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
  • RJ45 to DB9 console interface for switch basic management and setup
  • One 10/100BASE-TX Management port

Stacking Features

  • IP Stacking
    • Connects with stack member via Gigabit TP, SFP and 10G SFP+ interfaces
    • Single IP address management, supporting up to 16 IP units stacked together
  • Hardware Stacking
    • Virtualized multiple SGS-5240 switch series stacked into one logical device
    • Connects with stack member via assigned 10G SFP+ interfaces
    • Single IP address stack management, supporting up to 6 hardware units stacked together
    • Stacking architecture supports redundant ring mode

IP Routing Features

  • IPv4/IPv6 hardware static routing
  • Routing interface provides per VLAN routing mode

Physical Ports

  • 24 10/100/1000BASE-T RJ45 copper ports
  • 4 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
  • RJ45 to DB9 console interface for switch basic management and setup
  • One 10/100BASE-TX Management port

Stacking Features

  • IP Stacking
    • Connects with stack member via Gigabit TP, SFP and 10G SFP+ interfaces
    • Single IP address management, supporting up to 16 IP units stacked together
  • Hardware Stacking
    • Virtualized multiple SGS-5240 switch series stacked into one logical device
    • Connects with stack member via assigned 10G SFP+ interfaces
    • Single IP address stack management, supporting up to 6 hardware units stacked together
    • Stacking architecture supports redundant ring mode

IP Routing Features

  • IPv4/IPv6 hardware static routing
  • Routing interface provides per VLAN routing mode

Layer 2 Features

  • Supports VLAN
    • IEEE 802.1Q tag-based VLAN
    • Provider Bridging (VLAN Q-in-Q, IEEE 802.1ad) supported
    • GVRP for dynamic VLAN management
    • Protocol-based VLAN
    • MAC-based VLAN
    • IP subnet-based VLAN
    • Voice VLAN
  • Supports Link Aggregation
    • 802.3ad Link Aggregation Control Protocol (LACP)
    • Cisco ether-channel (static trunk)
  • Supports Spanning Tree Protocol
    • STP, IEEE 802.1D (Classic Spanning Tree Protocol)
    • RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)
    • MSTP, IEEE 802.1s (Multiple Spanning Tree Protocol, spanning tree by VLAN)
    • Supports BPDU & root guard
  • Port mirroring to monitor the incoming or outgoing traffic on a particular port (many to one)
  • Supports G.8032 ERPS (Ethernet Ring Protection Switching)
  • Loop protection to avoid broadcast loops
  • Link Layer Discovery Protocol (LLDP)
  • Compatible with Cisco uni-directional link detection (UDLD) that monitors a link between two switches and blocks the ports on both ends of the link if the link fails at any point between the two devices

Physical Ports

  • 24 100/1000BASE-X SFP slots 
  • 4-Port 10/100/1000BASE-T RJ45 copper interfaces, shared with Port-1 to Port-4
  • 4 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
  • RJ45 to DB9 console interface for switch basic management and setup
  • One 10/100BASE-TX Management port

Stacking Features

  • IP Stacking
    • Connects with stack member via Gigabit TP, SFP and 10G SFP+ interfaces
    • Single IP address management, supporting up to 16 IP units stacked together
  • Hardware Stacking
    • Virtualized multiple SGS-5240 switch series stacked into one logical device
    • Connects with stack member via assigned 10G SFP+ interfaces
    • Single IP address stack management, supporting up to 6 hardware units stacked together
    • Stacking architecture supports redundant ring mode

IP Routing Features

  • IPv4/IPv6 hardware static routing
  • Routing interface provides per VLAN routing mode

Physical Ports

  • 48 10/100/1000BASE-T RJ45 copper ports
  • 4 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
  • RJ45 to DB9 console interface for switch basic management and setup
  • One 10/100BASE-TX Management port

Stacking Features

  • IP Stacking
    • Connects with stack member via Gigabit TP, SFP and 10G SFP+ interfaces
    • Single IP address management, supporting up to 16 IP units stacked together
  • Hardware Stacking
    • Virtualized multiple SGS-5240 switch series stacked into one logical device
    • Connects with stack member via assigned 10G SFP+ interfaces
    • Single IP address stack management, supporting up to 6 hardware units stacked together
    • Stacking architecture supports redundant ring mode

IP Routing Features

  • IPv4/IPv6 hardware static routing
  • Routing interface provides per VLAN routing mode

Physical Port

  • 24-Port 10/100/1000Base-T RJ-45 copper
  • 4 100/1000Base-X mini-GBIC/SFP slots, shared with Port-21 to Port-24 compatible with 100Base-FX SFP
  • 2 10GBase-SR/LR SFP+ slots, compatible with 1000Base-SX/LX/BX SFP
  • 2 10GBase-SR/LR SFP+ stackable slots
  • RJ-45 console interface for basic management and setup

Stacking Features

  • Physical stacking up to 16 units, 384 Gigabit ports, 32 10 Gigabit ports
  • Single IP address stack management
  • Stacking architecture supports Chain and Ring mode
  • Plug and Play connectivity
  • Mirror across stack
  • Link Aggregation groups spanning multiple switches in a stack
  • Physical MAC address learning with MAC table synchronization across stack

Layer 2 Features

  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • High performance of Store-and-Forward architecture and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • Storm Control support
  • – Broadcast / Multicast / Unknown unicast
  • Supports VLAN
  • – IEEE 802.1Q tagged VLAN- Up to 255 VLANs groups, out of 4094 VLAN IDs- Supports provider bridging (VLAN Q-in-Q, IEEE 802.1ad- Private VLAN Edge (PVE)- Protocol-based VLAN- MAC-based VLAN- Voice VLAN
  • Supports Spanning Tree Protocol
  • – STP, IEEE 802.1D Spanning Tree Protocol- RSTP, IEEE 802.1w Rapid Spanning Tree Protocol- MSTP, IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN- BPDU Guard
  • Supports Link Aggregation– 802.3ad Link Aggregation Control Protocol (LACP)- Cisco ether-channel (Static Trunk)- Maximum 10 trunk groups, up to 16 ports per trunk group- Up to 32Gbps bandwidth (full duplex mode)
  • Provides port mirror (many-to-1)
  • Port mirroring to monitor the incoming or outgoing traffic on a particular port
  • Loop protection to avoid broadcast loops

Physical Port

  • 24-Port 10/100/1000BASE-T RJ45 copper with IEEE 802.3at / 802.3af Power over Ethernet Injector function
  • 4 100/1000BASE-X mini-GBIC/SFP slots, shared with Port-21 to Port-24 compatible with 100BASE-FX SFP
  • 2 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
  • 2 10GBASE-SR/LR SFP+ stackable slots
  • RJ45 console interface for basic management and setup

Stacking Features

  • Physical stacking up to 16 units, 384 Gigabit ports, 32 10 Gigabit ports
  • Single IP address stack management
  • Stacking architecture supports Chain and Ring mode
  • Plug and Play connectivity
  • Mirror across stack
  • Link Aggregation groups spanning multiple switches in a stack
  • Physical MAC address learning with MAC table synchronization across stack

Power over Ethernet

  • Complies with IEEE 802.3at High Power over Ethernet end-span PSE
  • Complies with IEEE 802.3af Power over Ethernet end-span PSE
  • Up to 24 ports of IEEE 802.3af / 802.3at devices powered
  • Supports PoE Power up to 30.8 watts for each PoE port
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100 meters
  • PoE Management
  • – Total PoE power budget control- Per port PoE function enable/disable- PoE Port Power feeding priority- Per PoE port power limitation- PD classification detection- PD alive-check- PoE schedule- PD power recycling schedule

L2+ Metro Ethernet Switch

Physical Port

  • 16 100/1000BASE-X mini-GBIC/SFP slots
  • 8 10/100/1000BASE-T RJ45 copper ports
  • RJ45 to RS232 DB9 console interface for basic management and setup

Hardware Conformance

  • 36 to 60V DC, redundant power with polarity reverse protect function
  • 0 to 60 degrees C operating temperature
  • 19-inch rack-mountable
  • Relay alarm for port breakdown, power failure
  • Two built-in thermal fans

Layer 2 Features

  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • High performance of Store-and-Forward architecture, and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • Storm control support
  • – Broadcast / Unicast / Unknown unicast
  • Supports VLAN
  • – IEEE 802.1Q tagged VLAN- Up to 255 VLANs groups, out of 4095 VLAN IDs- Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)- Private VLAN Edge (PVE)- Protocol-based VLAN- MAC-based VLAN- IP subnet-based VLAN- Voice VLAN
  • Supports Spanning Tree Protocol
  • – STP, IEEE 802.1D Spanning Tree Protocol- RSTP, IEEE 802.1w Rapid Spanning Tree Protocol- MSTP, IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN- BPDU Guard
  • Supports Link Aggregation
  • – 802.3ad Link Aggregation Control Protocol (LACP)- Cisco ether-channel (static trunk)- Maximum 24 trunk groups, with 8 ports for each trunk- Up to 16Gbps bandwidth (full duplex mode)
  • Provides port mirror (many-to-1)
  • Port mirroring monitors the incoming or outgoing traffic on a particular port
  • Loop protection to avoid broadcast loops

Physical Port

  • 8 100/1000Base-X SFP mini-GBIC slots
  • 2-Port 10/100/1000Base-T Gigabit Ethernet RJ-45
  • One RJ-45 console interface for basic management and setup

Redundant Power System

  • Redundant Power System: 100V ~ 240V AC / Dual 36V ~ 72V DC
  • Active-active redundant power failure protection
  • Backup of catastrophic power failure on one supply
  • Fault tolerance and resilience

Digital Input / Digital Output

  • 2 Digital Input (DI)
  • 2 Digital Output (DO)
  • Integrates sensors into auto alarm system
  • Transfer alarm to IP network via SNMP trap

Hardware Design

  • -10 to 60 degrees C operating temperature for DC power input only
  • 13-inch desktop size, 19-inch Rack-mountable
  • Relay alarm for port breakdown, power failure
  • Fanless design

L2+ Gigabit Ethernet Switch

Physical Port

  • 24 100/1000Base-X mini-GBIC/SFP slots
  • 8-port 10/100/1000Base-T Gigabit Ethernet RJ-45, shared with Port-1 to Port-8
  • RJ45 to RS-232 DB9 console interface for basic management and setup

Layer 2 Features

  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • High performance of Store-and-Forward architecture and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • Storm Control support
  • – Broadcast / Unicast / Unknown Unicast
  • Supports VLAN– IEEE 802.1Q tagged VLAN- Up to 255 VLANs groups, out of 4095 VLAN IDs- Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)- Private VLAN Edge (PVE)- Protocol-based VLAN- MAC-based VLAN- IP Subnet-based VLAN- Voice VLAN
  • Supports Spanning Tree Protocol
  • – STP, IEEE 802.1D Spanning Tree Protocol- RSTP, IEEE 802.1w Rapid Spanning Tree Protocol- MSTP, IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN- BPDU Guard
  • Supports Link Aggregation
  • – 802.3ad Link Aggregation Control Protocol (LACP)- Cisco ether-channel (Static Trunk)- Maximum 12 trunk groups, up to 8 ports per trunk group- Up to 16Gbps bandwidth (full duplex mode)
  • Provides Port Mirror (many-to-1)
  • Port Mirroring to monitor the incoming or outgoing traffic on a particular port
  • Loop protection to avoid broadcast loops

Physical Port

  • 10-Port 10/100/1000BASE-T RJ45 copper with 8-Port IEEE 802.3at/af Power over Ethernet Injector function
  • 2 100/1000BASE-X mini-GBIC/SFP slots
  • RJ45 console interface for basic management and setup

Power over Ethernet

  • Complies with IEEE 802.3at High Power over Ethernet end-span PSE
  • Complies with IEEE 802.3af Power over Ethernet end-span PSE
  • Up to 8 ports of IEEE 802.3af/802.3at devices powered
  • Supports PoE Power up to 30.8 watts for each PoE port
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100 meters
  • PoE Management
  • – Total PoE power budget control- Per port PoE function enable/disable- PoE Port Power feeding priority- Per PoE port power limitation- PD classification detection- PD alive check- PoE schedule- PD power recycling schedule

Physical Ports

  • 24 10/100/1000BASE-T RJ45 copper ports
  • 4 100/1000BASE-X /SFP slots, shared with Port-21 to Port-24
  • Console interface for basic management and setup

Layer 2 Features

  • High performance of Store-and-Forward architecture and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • Storm Control support
    • Broadcast/Multicast/Unknown unicast
  • Supports VLAN
    • IEEE 802.1Q tagged VLAN
    • Up to 255 VLANs groups, out of 4094 VLAN IDs
    • Supports provider bridging (VLAN Q-in-Q, IEEE 802.1ad) 
    •  
  • Supports Spanning Tree Protocol
    • IEEE 802.1D Spanning Tree Protocol (STP)
    • IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
    • IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN
    • BPDU Guard
  • Supports Link Aggregation
    • 802.3ad Link Aggregation Control Protocol (LACP)
    • Cisco ether-channel (static trunk)
    • Up to 32Gbps bandwidth (full duplex mode)
  • Provides port mirroring (many-to-1)
  • Port mirroring to monitor the incoming or outgoing traffic on a particular port
  • Loop protection to avoid broadcast loops
  • Compatible with Cisco Uni-directional link detection (UDLD) that monitors a link between two switches and blocks the ports on both ends of the link if the link fails at any point between the two devices.

Physical Port

  • 24-port 10/100/1000BASE-T RJ45 copper with 802.3at PoE+ injector function
  • 4 100/1000BASE-X mini-GBIC/SFP slots, shared with port-21 to port-24
  • RS232 RJ45 console interface for switch basic management and setup

Power over Ethernet

  • Complies with IEEE 802.3at Power over Ethernet Plus/end-span PSE
  • Up to 24 IEEE 802.3af/802.3at devices powered
  • Supports PoE power up to 36 watts for each PoE port
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100 meters in standard mode and 250m in extended mode
  • PoE management feature
    • PoE admin-mode control 
    • PoE management mode selection
    • Per port PoE function enable/disable
    • PoE port power feeding priority
    • Per PoE port power limit
    • PoE Port Status monitoring
    • PD classification detection
    • Sequence port PoE
    • PoE extension
  • Intelligent PoE features
    • Temperature threshold control
    • PoE usage threshold control
    • PoE schedule
    • PD alive check
    • LLDP PoE neighbors

Physical Port

  • 16-port 10/100/1000BASE-T RJ45 copper with 802.3at PoE+ injector function
  • 4 10/100/1000Mbps TP and SFP shared combo interfaces,  supporting 100/1000Mbps dual mode, shared with Ports 17 to 20
  • RS232 RJ45 console interface for switch basic management and setup

Power over Ethernet 

  • Complies with IEEE 802.3at Power over Ethernet Plus/end-span PSE
  • Up to 16 IEEE 802.3af/802.3at devices powered
  • Supports PoE power up to 36 watts for each PoE port
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100 meters in standard mode and 250m in extended mode
  • PoE management features
    • PoE admin-mode control 
    • PoE management mode selection
    • Per port PoE function enable/disable
    • PoE port power feeding priority
    • Per PoE port power limit
    • PoE Port Status monitoring
    • PD classification detection
    • Sequence port PoE
    • PoE extension
  • Intelligent PoE features
    • Temperature threshold control
    • PoE usage threshold control
    • PoE schedule
    • PD alive check
    • LLDP PoE neighbors

Scroll to Top

The candidate who wants to apply for a job must drop your CV/Resume at hr@ayk.com.pk

X
Contact Us
close slider

CONTACT US