Layer 3 Chassis

Hardware and Performance

  • 6 open module slots design:
    • Up to 2 Management Modules 
    • Up to 4 Switch Modules
  • Hot-swappable switching modules
  • 1 RJ45 serial console interface on Management Module for switch basic management and setup

Redundant Power System

  • 3 power slots
  • 100~240V AC and 48V DC power redundancy
    • 1 default AC power supply 
    • 2 additional open slots for optional power supply
  • Active-active redundant power failure protection
  • Backup of catastrophic power failure on one supply

IP Routing Features

  • IPv4 Routing protocol supports RIP v1/v2, OSPFv2 and BGP4
  • IPv6 Routing protocol supports RIPng, OSPFv3 and BGP4+
  • Routing interface provides VLAN routing mode 
  • Policy-based Routing (PBR) for IPv4
  • VRRP protocol for redundant routing deployment
  • Supports route redistribution 

Multicast Routing Features

  • Supports Multicast Routing Protocols:
  • PIM-DM (Protocol Independent Multicast – Dense Mode)
  • PIM-SM (Protocol Independent Multicast – Sparse Mode)
  • PIM-SSM (Protocol Independent Multicast – Source-Specific Multicast Mode)
  • Supports IGMP v1/v2/v3

Hardware and Performance

  • 4 open module slots design:
  • – 2 Management Modules with 2 Standard Modules- 1 Management Module with 3 Standard Modules
  • 160-port Gigabit copper, 156-port Gigabit SFP, 60-port 10G SFP+ and 6-port 40G QSFP+
  • Hot-swappable switching modules
  • Non-blocking wire-speed Layer 2 and Layer 3 switching
  • 1 RJ45 serial console interface on Management Module for switch basic management and setup

Redundant Power System

  • 100~240V AC dual power redundant
  • – 1 default AC power supply- 1 additional open slot for optional power supply
  • Active-active redundant power failure protection
  • Backup of catastrophic power failure on one supply

IP Stacking

  • IP stacking technology — connect with stack member via any Gigabit /10G/40G interface
  • Single IP address management, supporting up to stackable 24 units

IP Routing Features

  • IP Routing protocol supports RIP v1/v2, OSPF v2, BGP4
  • Routing interface provides VLAN routing mode
  • Policy-based Routing(PBR) for IPv4 and IPv6
  • VRRP protocol for redundant routing deployment
  • Supports route redistribution

Multicast Routing Features

  • Supports Multicast Routing Protocols:
  • – PIM-DM (Protocol Independent Multicast – Dense Mode)- PIM-SM (Protocol Independent Multicast – Sparse Mode)- PIM-SSM (Protocol Independent Multicast – Source-Specific Multicast Mode)- DVMRP (Distance Vector Multicast Routing Protocol)
  • Supports IGMP v1/v2/v3

Layer 3 100G Switch

Physical Ports

  • 24 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
  • 4 QSFP28 slots, each supports native 100 Gigabit Ethernet, 40G and 4 x 10 Gigabit Ethernet modes
  • RJ45 to DB9 console interface for switch basic management and setup

IP Routing Features

  • Supports maximum 128 static routes and route summarization
  • Supports dynamic routing protocol: RIP and OSPF

Layer 3 Telecom Switch

Physical Ports

  • 24 100/1000BASE-X mini-GBIC/SFP ports
  • Eight 10/100/1000BASE-T RJ45 copper ports, shared with Port-1 to Port-8
  • 4 10GBASE-SR/LR SFP+ ports, compatible with 1000BASE-SX/LX/BX SFP
  • RJ45 to DB9 console interface for switch basic management and setup
  • 1 USB2.0 interface for configuration and firmware storage

Stacking Features

  • IP Stacking
    • Connects with stack member via Gigabit TP, SFP and 10G SFP+ interfaces
    • Single IP address management, supporting up to 24 IP units stacked together

Hardware Stacking

  • Virtualized multiple XGS3-24242 into one logical device
  • Connects with stack member via assigned 10G SFP+ interfaces
  • Single IP address stack management, supporting up to 4 hardware units stacked together
  • Stacking architecture supports redundant ring mode

IP Routing Features

  • IP routing protocol supports RIPv1/v2RIPngOSPFv2/v3BGP4/4+
  • Routing interface provides per VLAN routing mode 
  • VRRPv1/v3 protocol for redundant routing deployment 
  • Supports route redistribution 
  • Supports hardware-based wire-speed VLAN routing

Multicast Routing Features

  • Supports PIM-DM (Protocol Independent Multicast – Dense Mode) and PIM-SM (Protocol Independent Multicast – Sparse Mode) and PIM-SSM (Protocol Independent Multicast – Source Specific Multicast)
  • Supports DVMRP (Distance Vector Multicast Routing Protocol)
  • Supports IGMP v1/v2/v3 and MLD v1/v2

Physical Port

  • 24-port 10/100/1000BASE-T RJ45 copper
  • 4 100/1000BASE-X mini-GBIC/SFP slots, shared with Port-21 to Port-24
  • 4 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
  • RJ45 to RS232 console interface for switch basic management and setup
  • 1 RJ45 Ethernet management port for switch basic management and setup
  • 1 USB 2.0 for backup/upload configuration and firmware upgrade

IP Stacking

  • Connects with stack member via both Gigabit TP and SFP interfaces
  • Single IP address management, supporting up to 24 units stacked together

IP Routing Features

  • IP routing protocol supports RIPv1/v2RIPngOSPFv2/v3BGP4/4+
  • Routing interface provides per VLAN routing mode
  • VRRPv1/v3 protocol for redundant routing deployment
  • Supports route redistribution

Multicast Routing Features

  • Supports PIM-DM (Protocol Independent Multicast – Dense Mode) and PIM-SM (Protocol Independent Multicast – Sparse Mode) and PIM-SSM (Protocol Independent Multicast – Source Specific Multicast)
  • Supports DVMRP (Distance Vector Multicast Routing Protocol)
  • Supports IGMP v1/v2/v3 and MLD v1/v2

Layer 3 Enterprise Switch

Physical Ports

  • 24 100/1000BASE-X mini-GBIC/SFP slots
  • Eight 10/100/1000BASE-T RJ45 copper ports, shared with Port-1 to Port-8
  • 4 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
  • RJ45 to DB9 console interface for switch basic management and setup
  • 1 USB2.0 interface for configuration and firmware storage

Stacking Features

  • IP Stacking
  • – Connects with stack member via Gigabit TP, SFP and 10G SFP+ interfaces
    – Single IP address management, supporting up to 24 IP units stacked together
  • Hardware Stacking
  • – Virtualized multiple SGS-6341 series switches into one logical device
    – Connects with stack member via assigned 10G SFP+ interfaces
    – Single IP address stack management, supporting up to 4 hardware units stacked together
    – Stacking architecture supports redundancy Ring mode

IP Routing Features

  • IP routing protocol supports RIPv1/v2RIPngOSPFv2/v3BGP4/4+
  • Routing interface provides per VLAN routing mode 
  • VRRPv1/v3 protocol for redundant routing deployment 
  • Supports route redistribution
  • Supports hardware-based wire-speed VLAN routing

Multicast Routing Features

  • Supports PIM-DM (Protocol Independent Multicast – Dense Mode) and PIM-SM (Protocol Independent Multicast – Sparse Mode) and PIM-SSM (Protocol Independent Multicast – Source Specific Multicast)
  • Supports DVMRP (Distance Vector Multicast Routing Protocol)
  • Supports IGMP v1/v2/v3 and MLD v1/v2

Physical Ports

  • 24-port 10/100/1000BASE-T Gigabit Ethernet RJ45 with 24-port IEEE 802.3at/af PoE injector
  • 4 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
  • RJ45 to DB9 console interface for switch basic management and setup

Power over Ethernet

  • Complies with IEEE 802.3at Power over Ethernet Plus, end-span PSE
  • Backward compatible with IEEE 802.3af Power over Ethernet
  • Up to 24 ports of IEEE 802.3af/802.3at devices powered
  • Supports PoE power up to 30 watts for each PoE port
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100 meters
  • PoE management
  • – Total PoE power budget control
    – Per port PoE function enable/disable
    – PoE port power feeding priority
    – Per PoE port power limitation
    – PD classification detection
    – PoE schedule

IP Stacking

  • Connects with stack member via both Gigabit TP and SFP interfaces
  • Single IP address management, supporting up to 24 units stacked together

IP Routing Features

  • IP routing protocol supports RIPv1/v2, RIPng, OSPFv2/v3, BGP4/4+
  • Routing interface provides per VLAN routing mode
  • VRRPv1/v3 protocol for redundant routing deployment
  • Supports route redistribution

Multicast Routing Features

  • Supports PIM-DM (Protocol Independent Multicast – Dense Mode) and PIM-SM (Protocol Independent Multicast – Sparse Mode) and PIM-SSM (Protocol Independent Multicast – Source Specific Multicast)
  • Supports DVMRP (Distance Vector Multicast Routing Protocol)
  • Supports IGMP v1/v2/v3 and MLD v1/v2

Physical Ports

  • 8 10/100/1000BASE-T RJ45 ports
  • 12 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
  • RJ45 to DB9 console interface for switch basic management and setup

IP Routing Features

  • Supports maximum 128 static routes and route summarization
  • Supports dynamic routing protocol: RIP and OSPF

Layer 3 Aggregation Switch with LCD Touch Screen

Physical Port

  • 24 10/100/1000BASE-T Gigabit RJ45 copper ports with 24-port IEEE 802.3bt PoE++ injector function
  • 2 10GBASE-T RJ45 interfaces with auto MDI/MDI-X function
  • 2 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
  • RJ45 console interface for switch basic management and setup

802.3bt Power over Ethernet

  • Complies with IEEE 802.3bt Power over Ethernet Plus Plus
  • Backward compatible with IEEE 802.3af /at Power over Ethernet
  • Up to 24 ports of IEEE 802.3af/IEEE 802.3at/IEEE 802.3bt PoE devices powered
  • 8 PoE ports with built-in 802.3bt PoE++ Type-4 90W injector function (Port-1 to Port-8)
  • 16 PoE ports with built-in 802.3bt PoE++ Type-3 60W injector function (Port-9 to Port-24)
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100 meters
  • PoE management
  • – Total PoE power budget control
    – Per port PoE function enable/disable
    – PoE admin-mode control
    – PoE port power feeding priority
    – Per PoE port power limitation
    – PD classification detection
    – Temperature threshold control
    – PD alive check
    – PoE schedule

Physical Port 

  • 24 10/100/1000BASE-T Gigabit RJ45 copper ports with 24-port IEEE 802.3bt PoE++ injector function
  • 4 10GBASE-SR/LR SFP+ ports, compatible with 1000BASE-SX/LX/BX and 2500BASE-X SFP
  • RJ45 console interface for switch basic management and setup 

802.3bt Power over Ethernet

  • Complies with IEEE 802.3bt Power over Ethernet Plus Plus
  • Backward compatible with IEEE 802.3af /at Power over Ethernet
  • Up to 24 ports of IEEE 802.3af/IEEE 802.3at/IEEE 802.3bt PoE devices powered
  • 8 PoE ports with built-in 802.3bt PoE++ Type-4 90W injector function (Port-1 to Port-8)
  • 16 PoE ports with built-in 802.3bt PoE++ Type-3 60W injector function (Port-9 to Port-24)
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100 meters at standard mode and 160 meters at Extended mode
  • PoE management
    • Total PoE power budget control
    • Per port PoE function enable/disable
    • PoE admin-mode control
    • PoE port power feeding priority
    • Per PoE port power limitation
    • PD classification detection
    • Temperature threshold control
    • PD alive check
    • PoE schedule

Physical Port

  • 24 10/100/1000BASE-T Gigabit RJ45 copper ports 
  • 4 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
  • RJ45 console interface for switch basic management and setup 

Physical Port

  • 16 10/100/1000BASE-T Gigabit RJ45 copper ports with 16-port IEEE 802.3af/at/bt Ultra PoE injector
  • 2 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
  • RJ45 console interface for switch basic management and setup

802.3bt Ultra Power over Ethernet

  • Complies with IEEE 802.3at Power over Ethernet Plus, end-span/mid-span PSE
  • Backward compatible with IEEE 802.3af Power over Ethernet
  • Up to 16 ports of IEEE 802.3af/IEEE 802.3at/IEEE 802.3bt ultra PoE devices powered
  • Supports PoE power up to 75 watts for each ultra PoE port
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100 meters
  • PoE management
  • – Total PoE power budget control
    – Per port PoE function enable/disable
    – PoE admin-mode control
    – PoE port power feeding priority
    – Per PoE port power limitation
    – PD classification detection
    – Temperature threshold control
    – PD alive check
    – PoE schedule

Layer 3 Aggregation Switch

Physical Port

  • 48 100/1000BASE-X mini-GBIC/SFP slots
  • Two 10/100/1000BASE-T RJ45 copper ports, shared with Port-1 to Port-2
  • 4 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
  • RS-232 RJ45 console interface for switch basic management and setup

 

Layer 3 IP Routing Features

  • IP dynamic routing protocol supports OSPFv2
  • Routing interface provides per VLAN routing mode
  • Supports maximum 128 static routes and route summarization
  • Supports hardware-based wire-speed VLAN routing

Physical Port

  • 24 10/100/1000BASE-T Gigabit RJ45 copper ports with 24-port IEEE 802.3bt PoE++ injector function
  • 2 10GBASE-T RJ45 interfaces with auto MDI/MDI-X function
  • 2 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP and 2.5G SFP transceiver
  • RJ45 console interface for switch basic management and setup

802.3bt Power over Ethernet

  • Complies with IEEE 802.3bt Power over Ethernet Plus Plus
  • Backward compatible with IEEE 802.3at Power over Ethernet Plus
  • Up to 24 ports of IEEE 802.3af/IEEE 802.3at/IEEE 802.3bt PoE devices powered
  • 24 PoE ports with built-in 802.3bt PoE++ Type-4 90W injector function
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100 meters
  • PoE management features
    • Total PoE power budget control
    • Per port PoE function enable/disable
    • PoE admin-mode control 
    • PoE port power feeding priority
    • Per PoE port power limit
    • PD classification detection
    • PoE extend mode control to support power feeding up to a distance of up to 200 meters
  •  Intelligent PoE features
    • Temperature threshold control
    • PoE usage threshold control
    • PD alive check
    • PoE schedule

Layer 3 Features

  • IP dynamic routing protocol supports OSPFv2
  • IPv4/IPv6 hardware static routing
  • Routing interface provides per VLAN routing mode
  • IP interfaces (Max. 128 VLAN interfaces)
  • Routing table (Max. 128 routing entries)

Physical Port

  • 8-port 10/100/1000BASE-T with 36W PoE injector function
  • 2-port 1G/2.5G/10G BASE-X SFP+
  • RS232 RJ45 console interface for switch basic management and setup

Power over Ethernet 

  • Up to 8 ports of IEEE 802.3af/802.3at devices powered
  • Supports PoE power up to 36 watts for each PoE port
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100 meters
  • PoE Management
    • PoE admin-mode control 
    • PoE usage threshold
    • Temperature threshold
    • PoE Port Status monitoring
    • PD classification detection
    • Per port PoE function enable/disable
    • Per PoE port power limit
    • PoE Port Power feeding priority
    • PoE extend mode control to support power feeding up to a distance of up to 200 meters
  • Intelligent PoE features
    • Temperature threshold control
    • PoE usage threshold control
    • PD alive check
    • PoE schedule

Layer 3 IP Routing Features

  • IP dynamic routing protocol supports RIPv2, OSPFv2 and OSPFv3
  • IPv4/IPv6 hardware static routing
  • Routing interface provides per VLAN routing mode

Physical Port

  • 48 10/100/1000BASE-T Gigabit RJ45 copper ports with 48-port IEEE 802.3af/at PoE+ injector function
  • 4 10GBASE-SR/LR SFP+ slots, compatible with 1000/2500BASE-SX/LX/BX SFP
  • RJ45 console interface for switch basic management and setup 

Power over Ethernet

  • Complies with IEEE 802.3at Power over Ethernet Plus/end-span PSE
  • Backward compatible with IEEE 802.3af Power over Ethernet
  • Up to 48 ports of IEEE 802.3af/IEEE 802.3at devices powered
  • Supports PoE power up to 36 watts for each PoE port
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100 meters in standard mode and 200m in extended mode
  • PoE management
    • Total PoE power budget control
    • Per port PoE function enable/disable
    • PoE admin-mode control
    • PoE port power feeding priority
    • Per PoE port power limitation
    • PD classification detection
    • Sequence port PoE
    • PoE extension
  • Intelligent PoE features
    • Temperature threshold control
    • PD alive check
    • PoE schedule

Physical Port

  • 24 10/100/1000BASE-T Gigabit RJ45 copper ports with IEEE 802.3bt PoE++ injector function
  • 4 100/1000BASE-X SFP slots, shared with port-21 to port-24 compatible with 100BASE-FX SFP
  • 4 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
  • RJ45 console interface for switch basic management and setup 

802.3bt Power over Ethernet

  • Complies with IEEE 802.3bt Power over Ethernet Plus Plus standard PSE
  • Backward compatible with IEEE 802.3at Power over Ethernet Plus
  • Up to 24 ports of IEEE 802.3af/IEEE 802.3at/IEEE 802.3bt PoE devices powered
  • 8 PoE ports with built-in 802.3bt PoE++ Type-4 90W injector function (Port-1 to Port-8)
  • 16 PoE ports with built-in 802.3bt PoE++ Type-3 60W injector function (Port-9 to Port-24)
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100 meters
  • PoE management
  • – Total PoE power budget control
    – Per port PoE function enable/disable
    – PoE admin-mode control
    – PoE port power feeding priority
    – Per PoE port power limitation
    – PD classification detection
  • Intelligent PoE features
  • – Temperature threshold control
    – PD alive check
    – PoE schedule

Layer 3 Features

  • IP dynamic routing protocol supports OSPFv2
  • IPv4/IPv6 hardware static routing
  • Routing interface provides per VLAN routing mode
  • IP interfaces (Max. 128 VLAN interfaces)
  • Routing table (Max. 128 routing entries)

Physical Port

  • 24 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE 802.3at PoE+ injector
  • 4 100/1000BASE-X mini-GBIC/SFP combo interface with Port-21 to Port-24
  • 4 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
  • 1 RJ45 console interface for basic management and setup

Power over Ethernet

  • Complies with IEEE 802.3at PoE+/end-span PSE
  • Up to 24 IEEE 802.3af/802.3at devices powered
  • Supports PoE power up to 36 watts for each PoE port
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100M
  • PoE Management
    •  Total PoE power budget control
    •  Per port PoE function enable/disable
    •  PoE port power feeding priority 
    •  Per PoE port power limit 
    •  PD classification detection 
  • Intelligent PoE features
    • Temperature threshold control
    • PD alive check
    • PoE schedule
    • PD scheduled power recycling

Physical Port 

  • 16 10/100/1000BASE-T Gigabit RJ45 copper ports with 16-port IEEE 802.3bt PoE++ injector function
  • 4 100/1000BASE-X mini-GBIC/SFP slots
  • 2 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
  • RJ45 console interface for switch basic management and setup 

802.3bt Power over Ethernet Plus Plus

  • Complies with IEEE 802.bt Power over Ethernet Plus Plus Type-4 PSE
  • Backward compatible with IEEE 802.3af/at Power over Ethernet Plus
  • Up to 16 ports of PoE devices powered
  • 8 PoE ports with built-in 802.3bt PoE++ Type-4 90W injector function (Port-1 to Port-8)
  • 8 PoE ports with built-in 802.3bt PoE++ Type-3 60W injector function (Port-9 to Port-16)
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100 meters
  • PoE management
    • Total PoE power budget control
    • Per port PoE function enable/disable
    • PoE admin-mode control
    • PoE port power feeding priority
    • Per PoE port power limitation
    • PD classification detection
  • Intelligent PoE features
    • Temperature threshold control
    • PD alive check
    • PoE schedule

Physical Port

  • 8-port 10/100/1000BASE-T with 95W PoE injector
  • 2-port 1G/2.5G/10G BASE-X SFP+
  • RS-232 RJ45 console interface for switch basic management and setup

Power over Ethernet 

  • Up to 8 ports of IEEE 802.3af/802.3at/802.3bt devices powered
  • Supports PoE Power up to 95 watts for each PoE port
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100 meters in standard mode and 250m in extend mode
  • PoE Management
    • PoE Port Status monitoring
    • Over Temperature Protection
    • PoE usage threshold
    • Temperature threshold
    • Per port PoE function enable/disable
    • PoE Port Power feeding priority
    • Per PoE port power limit
    • PD classification detection
    • Sequence port PoE

Physical Port

  • 14 100/1000BASE-X SFP ports
  • 10 100/1000/2500BASE-X SFP ports
  • 4 10/100/1000BASE-T RJ45 ports, shared with Port-1 to Port-4
  • 4 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX and 2500BASE-X SFP
  • RJ45 to RS232 DB9 console interface for basic management and setup

Hardware Conformance

  • One 100 to 240V AC or dual 36 to 60V DC power input, redundant power with polarity reverse protect function 
  • 19-inch rack-mountable design
  • IP30 metal case 
  • -10 to 60 degrees C operating temperature

Digital Input and Digital Output

  • 2 digital input (DI)
  • 2 digital output (DO)
  • Integrates sensors into auto alarm system
  • Transfers alarm to IP network via email and SNMP trap

Layer 3 IP Routing Features

  • IP dynamic routing protocol supports OSPFv2
  • Routing interface provides per VLAN routing mode
  • Supports maximum 128 static routes and route summarization

Scroll to Top

The candidate who wants to apply for a job must drop your CV/Resume at hr@ayk.com.pk

X
Contact Us
close slider

CONTACT US