L2/L4 Gigabit Ethernet Switch

Physical Port

  • 48-port 10/100/1000BASE-T Gigabit RJ45 copper
  • 4 100/1000BASE-X mini-GBIC/SFP slots
  • Reset button for system factory default
  • RJ45 console interface for basic management and setup

Layer 2 Features

  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • High performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • Supports VLAN
  • – IEEE 802.1Q tagged VLAN- Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)- Protocol VLAN- Voice VLAN- Private VLAN (Protected port)- Management VLAN- GVRP
  • Supports Spanning Tree Protocol
  • – STP (Spanning Tree Protocol)- RSTP (Rapid Spanning Tree Protocol)- MSTP (Multiple Spanning Tree Protocol)- STP BPDU Guard, BPDU Filtering and BPDU Forwarding
  • Supports Link Aggregation
  • – IEEE 802.3ad Link Aggregation Control Protocol (LACP)- Cisco ether-channel (static trunk)- Maximum 8 trunk groups, up to 8 ports per trunk group
  • Provides port mirror (many-to-1)
  • Loop protection to avoid broadcast loops

Security

  • Authentication
  • – IEEE 802.1X port-based network access authentication- Built-in RADIUS client to co-operate with the RADIUS servers- DHCP Option 82- RADIUS / TACACS+ authentication
  • Access Control List
  • – IPv4 / IPv6 IP-based ACL- IPv4 / IPv6 IP-based ACE- MAC-based ACL- MAC-based ACE
  • MAC Security
  • – Static MAC- MAC Filtering
  • Port security for source MAC address entries filtering
  • DHCP snooping to filter distrusted DHCP messages
  • Dynamic ARP inspection discards ARP packets with invalid MAC address to IP address binding
  • IP source guard prevents IP spoofing attacks
  • DoS attack prevention
  • SSH/SSL

Physical Port

  • 48 10/100/1000BASE-T Gigabit RJ45 copper ports with 48-port IEEE 802.3at/af PoE injector
  • 4 100/1000BASE-X mini-GBIC/SFP slots

Power over Ethernet

  • Complies with IEEE 802.3at Power over Ethernet Plus, end-span PSE
  • Backward compatible with IEEE 802.3af Power over Ethernet
  • Up to 48 ports of IEEE 802.3af/802.3at devices powered
  • Supports PoE power up to 36 watts for each PoE port
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100 meters in standard mode and 250m in extend mode
  • PoE management
  • – Total PoE power budget control
    – Per port PoE function enable/disable
    – PoE port power feeding priority
    – Per PoE port power limitation
    – PD classification detection
    – PD alive-check
    – PoE schedule

Layer 2 Features

  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • High performance Store and Forward architecture, broadcast storm control, runt/CRC filtering that eliminates erroneous packets to optimize the network bandwidth
  • Supports VLAN
  • – IEEE 802.1Q tagged VLAN
    – Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
    – Protocol VLAN
    – Voice VLAN
    – Private VLAN
    – Management VLAN
    – GVRP
  • Supports Spanning Tree Protocol
  • – STP (Spanning Tree Protocol)
    – RSTP (Rapid Spanning Tree Protocol)
    – MSTP (Multiple Spanning Tree Protocol)
    – STP BPDU Guard, BPDU filtering and BPDU forwarding
  • Supports Link Aggregation
  • – IEEE 802.3ad Link Aggregation Control Protocol (LACP)
    – Cisco ether-channel (static trunk)
  • Provides port mirror (many-to-1)
  • Loop protection to avoid broadcast loops

Physical Port

  • 24-Port 10/100/1000BASE-T Gigabit RJ45 copper
  • 4 100/1000BASE-X mini-GBIC/SFP slots
  • RJ45 console interface for switch basic management and setup
  • Reset button for system factory default

Switching

  • Hardware-based 10/100Mbps, half/full duplex and 1000Mbps full duplex mode, flow control and auto-negotiation, and auto MDI/MDI-X
  • Features Store-and-Forward mode with wire-speed filtering and forwarding rates
  • IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
  • 10K jumbo frame
  • Automatic address learning and address aging
  • Supports CSMA/CD protocol

Layer 2 Features

  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • High performance Store and Forward architecture, broadcast storm control, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • Supports VLAN
    • IEEE 802.1Q tagged VLAN
    • Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
    • Protocol VLAN
    • Voice VLAN
    • Private VLAN
    • Management VLAN
    • GVRP
  • Supports Spanning Tree Protocol
    • STP (Spanning Tree Protocol)
    • RSTP (Rapid Spanning Tree Protocol)
    • MSTP (Multiple Spanning Tree Protocol)
    • STP BPDU Guard, BPDU Filtering and BPDU Forwarding
  • Supports Link Aggregation
    • IEEE 802.3ad Link Aggregation Control Protocol (LACP)
    • Cisco ether-channel (Static Trunk)
    • Maximum 8 trunk groups, up to 8 ports per trunk group 
  • Provides port mirror (many-to-1)
  • Loop protection to avoid broadcast loops
  • Supports ERPS (Ethernet Ring Protection Switching)

Physical Port

  • 24-port 10/100/1000BASE-T Gigabit RJ45 copper
  • 2 100/1000BASE-X mini-GBIC/SFP slots
  • RJ45 console interface for switch basic management and setup
  • Reset button for system factory default

Switching

  • Hardware-based 10/100Mbps, half/full duplex and 1000Mbps full duplex mode, flow control and auto-negotiation, and auto MDI/MDI-X
  • Features Store-and-Forward mode with wire-speed filtering and forwarding rates
  • IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
  • 9K jumbo frame
  • Automatic address learning and address aging
  • Supports CSMA/CD protocol

Layer 2 Features

  • Supports VLAN
    • IEEE 802.1Q tagged VLAN
    • Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
    • Protocol VLAN
    • Voice VLAN
    • Private VLAN (Protected port)
    • Management VLAN
    • GVRP
  • Supports Spanning Tree Protocol
    • STP (Spanning Tree Protocol)
    • RSTP (Rapid Spanning Tree Protocol)
    • MSTP (Multiple Spanning Tree Protocol)
    • STP BPDU Guard, BPDU Filtering and BPDU Forwarding
  • Supports Link Aggregation
    • IEEE 802.3ad Link Aggregation Control Protocol (LACP)
    • Cisco ether-channel (static trunk)
    • Maximum 8 trunk groups, up to 8 ports per trunk group 
  • Provides port mirror (many-to-1)
  • Loop protection to avoid broadcast loops
  • Supports ERPS (Ethernet Ring Protection Switching)

Physical Port

  • 16-port 10/100/1000BASE-T Gigabit RJ45 copper
  • 2 100/1000BASE-X mini-GBIC/SFP slots
  • RJ45 console interface for switch basic management and setup
  • Reset button for system factory default

Switching

  • Hardware based 10/100Mbps, half/full duplex and 1000Mbps full duplex mode, flow control and auto-negotiation and auto MDI/MDI-X
  • Features Store-and-Forward mode with wire-speed filtering and forwarding rates
  • IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
  • 9K jumbo frame
  • Automatic address learning and address aging
  • Supports CSMA/CD protocol

Layer 2 Features

  • Supports VLAN
  • – IEEE 802.1Q tagged VLAN
    – Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
    – Protocol VLAN
    – Voice VLAN
    – Private VLAN (Protected port)
    – Management VLAN
    – GVRP
  • Supports Spanning Tree Protocol– STP (Spanning Tree Protocol)- RSTP (Rapid Spanning Tree Protocol)- MSTP (Multiple Spanning Tree Protocol)- STP BPDU Guard, BPDU Filtering and BPDU Forwarding
  • Supports Link Aggregation
  • – IEEE 802.3ad Link Aggregation Control Protocol (LACP)
    – Cisco ether-channel (static trunk)
    – Maximum 8 trunk groups, up to 8 ports per trunk group
  • Provides port mirror (many-to-1)
  • Loop protection to avoid broadcast loops

Physical Port

  • 20 10/100/1000BASE-T RJ45 copper ports with 16-Port IEEE 802.3af PoE/802.3at PoE+/802.3bt PoE++ injector
  • 4 100/1000BASE-X mini-GBIC/SFP slots, shared with port-17 to port-20 compatible with 100BASE-FX SFP
  • RJ45 console interface for switch basic management and setup

Power over Ethernet

  • Complies with IEEE 802.3bt Power over Ethernet Plus Plus
  • Backward compatible with IEEE 802.3at Power over Ethernet Plus
  • Up to 16 ports of IEEE 802.3at/IEEE 802.3bt PoE devices powered
  • 8 PoE ports with built-in 802.3bt type-4 PoE 90W or ultra PoE 95-watt injector function (Ports 1 to 8)
  • 8 PoE ports with built-in 802.3bt type-3 PoE 60W or ultra PoE 72-watt injector function (Ports 9 to 16)
  • All PoE ports support 802.3at end-span/mid-span PoE 36W injector function
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100 meters in standard mode and 250m in extend mode
  • PoE management
  • – PoE admin-mode control 
    – PoE Legacy mode option
    – Temperature threshold control
    – PoE Chipset temperature display
    – Per port PoE function enable/disable
    – Per port PoE Inline mode option
    – PoE port power feeding priority
    – PD classification detection
  • Intelligent PoE features
  • – PD alive check
    – PoE schedule
    – PoE extension

Layer 2 Features

  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • High performance Store and Forward architecture, broadcast storm control, and runt/CRC filtering that eliminates erroneous packets to optimize the network bandwidth
  • Supports VLAN
  • – IEEE 802.1Q tagged VLAN
    – Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
    – Protocol VLAN
    – Voice VLAN
    – Private VLAN
    – Management VLAN
    – GVRP
  • Supports Spanning Tree Protocol
  • – STP (Spanning Tree Protocol)
    – RSTP (Rapid Spanning Tree Protocol)
    – MSTP (Multiple Spanning Tree Protocol)
    – STP BPDU Guard, BPDU filtering and BPDU forwarding
  • Supports Link Aggregation
  • – IEEE 802.3ad Link Aggregation Control Protocol (LACP)
    – Cisco ether-channel (static trunk)
    – 2 groups of 4-port trunk
  • Provides port mirror (many-to-1)
  • Loop protection to avoid broadcast loops

Physical Port

  • 8-port 10/100/1000BASE-T RJ45 copper with PoE injector function
  • 2 100/1000BASE-X mini-GBIC/SFP slots
  • RJ45 console interface for switch basic management and setup  

Power over Ethernet

  • Complies with IEEE 802.3bt PoE++ and 802.3at PoE+ standard PSE
  • Backward compatible with IEEE 802.3af Power over Ethernet
  • Selectable PoE mode: End-span/Mid-span/802.3bt/UPoE/Legacy 
  • Ports 1 to 6 support up to 36 watts
  • Ports 7 to 8 support up to 95 watts 
  • Each PoE port supports 54V DC power to powered device
  • 240-watt PoE budget
  • Auto detects powered device
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100 meters in standard mode and 250m in extended mode
  • PoE management
    • Total PoE power budget control
    • Per port PoE function enable/disable
    • PoE port power feeding priority
    • Per PoE port power limitation
    • PD classification detection
    • PoE extension
  • Intelligent PoE features
    • PD alive check
    • PoE schedule
    • Scheduled power recycling

Layer 2 Features

  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • High performance Store and Forward architecture, broadcast storm control, and runt/CRC filtering that eliminates erroneous packets to optimize the network bandwidth
  • Supports VLAN
    • IEEE 802.1Q tagged VLAN
    • Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
    • Protocol VLAN
    • Voice VLAN
    • Private VLAN
    • Management VLAN
    • GVRP
  • Supports Spanning Tree Protocol
    • STP (Spanning Tree Protocol)
    • RSTP (Rapid Spanning Tree Protocol)
    • MSTP (Multiple Spanning Tree Protocol)
    • STP BPDU Guard, BPDU filtering and BPDU forwarding
  • Supports Link Aggregation
    • IEEE 802.3ad Link Aggregation Control Protocol (LACP)
    • Cisco ether-channel (static trunk)
  • Provides port mirror (many-to-1)
  • Loop protection to avoid broadcast loops

Physical Port

  • 8 10/100/1000BASE-T Gigabit RJ45 copper ports
  • 2 100/1000BASE-X SFP ports
  • RJ45 console interface for switch basic management and setup 

Layer 2 Features

  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • High performance Store and Forward architecture, broadcast storm control, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • Supports VLAN
    • IEEE 802.1Q tagged VLAN
    • Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
    • Protocol VLAN
    • Voice VLAN
    • Private VLAN (Protected port)
    • Management VLAN
    • GVRP
  • Supports Spanning Tree Protocol
    • STP (Spanning Tree Protocol)
    • RSTP (Rapid Spanning Tree Protocol)
    • MSTP (Multiple Spanning Tree Protocol)
    • STP BPDU Guard, BPDU Filtering and BPDU Forwarding

L2/L4 Fast Ethernet Switch

Physical Port

  • 24 10/100BASE-TX RJ45 copper ports with IEEE 802.3at/af PoE+ injector function
  • 2 10/100/1000BASE-T Gigabit RJ45 copper ports
  • 2 1000BASE-X mini-GBIC/SFP slots, shared with port-25 to port-26
  • Reset button for system factory default

Switching

  • Hardware-based 10/100Mbps, half/full duplex and 1000Mbps full duplex mode, flow control and auto-negotiation, and auto MDI/MDI-X
  • Features Store-and-Forward mode with wire-speed filtering and forwarding rates
  • IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
  • Automatic address learning and address aging
  • Supports CSMA/CD protocol

Power over Ethernet

  • Complies with IEEE 802.3at Power over Ethernet Plus
  • Complies with IEEE 802.3af Power over Ethernet
  • Up to 24 ports of IEEE 802.3af/802.3at devices powered
  • Supports PoE Power up to 30 watts for each PoE port
  • 370-watt PoE budget
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 250m via extend mode
  • PoE Management
    • Per port PoE function enable/disable
    • Per port PoE operation mode selection
    • Per PoE port power budget control
    • PD classification detection and  PoE consumption usage status
  • Intelligent PoE features
    • PD alive check
    • PoE port sequence
    • PoE schedule

Physical Port

  • 16 10/100BASE-TX RJ45 copper ports with IEEE 802.3at/af PoE+ injector function
  • 2 10/100/1000BASE-T Gigabit RJ45 copper ports
  • 2 1000BASE-X mini-GBIC/SFP slots, shared with port-17 to port-18
  • Reset button for system factory default

 

Switching

  • Hardware-based 10/100Mbps, half/full duplex and 1000Mbps full duplex mode, flow control and auto-negotiation, and auto MDI/MDI-X
  • Features Store-and-Forward mode with wire-speed filtering and forwarding rates
  • IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
  • Automatic address learning and address aging
  • Supports CSMA/CD protocol

 

Power over Ethernet

  • Complies with IEEE 802.3at Power over Ethernet Plus
  • Complies with IEEE 802.3af Power over Ethernet
  • Up to 16 ports of IEEE 802.3af/802.3at devices powered
  • Supports PoE Power up to 30 watts for each PoE port
  • 240-watt PoE budget
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 250m via extend mode
  • PoE Management
    • Per port PoE function enable/disable
    • Per Port PoE operation mode selection
    • Per PoE port power budget control
    • PD classification detection and  PoE consumption usage status
  • Intelligent PoE features
    • PD alive check
    • PoE port sequence

Layer 2 Features

  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • High performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • Supports VLAN
    • Port-based VLAN, up to 18 VLAN groups
    • IEEE 802.1Q tagged VLAN
    • Protocol VLAN
    • Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
    • GVRP
    • Voice VLAN
  • Supports Spanning Tree Protocol
    • STP (IEEE 802.1D Spanning Tree Protocol)
    • RSTP (IEEE 802.1w Rapid Spanning Tree Protocol)
    • MSTP (IEEE 802.1s Multiple Spanning Tree Protocol)
    • STP BPDU filtering, BPDU Guard 
  • Supports Link Aggregation
    • IEEE 802.3ad Link Aggregation Control Protocol (LACP)
    • 1 LACP group, up to 2 ports per LACP group  
    • Cisco ether-channel (static trunk)
    • 1  trunk group, up to 2 ports per trunk group 
  • Provides port mirror (many-to-1)
  • Loop detection

Physical Port

  • 24-port 10/100BASE-TX RJ45 copper with IEEE 802.3at/af PoE+ injector
  • 2-port 10/100/1000BASE-T Gigabit RJ45 copper
  • 2 1000BASE-X mini-GBIC/SFP slots, shared with port-25 to port-26
  • RJ45 console interface for switch basic management and setup
  • Reset button for system factory default

Switching

  • Hardware-based 10/100Mbps, half/full duplex and 1000Mbps full duplex mode, flow control and auto-negotiation, and auto MDI/MDI-X
  • Features Store-and-Forward mode with wire-speed filtering and forwarding rates
  • IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
  • Automatic address learning and address aging
  • Supports CSMA/CD protocol

Power over Ethernet

  • Complies with IEEE 802.3at Power over Ethernet Plus
  • Complies with IEEE 802.3af Power over Ethernet
  • Up to 24 ports of IEEE 802.3af/802.3at devices powered
  • Supports PoE Power up to 30 watts for each PoE port
  • 240-watt PoE budget
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 250m via extend mode
  • PoE Management
    • Per port PoE function enable/disable
    • Per Port PoE operation mode selection
    • Per PoE port power budget control
    •  
    • PD classification detection and  PoE consumption usage status
  • Intelligent PoE features
    • PD alive check
    • PoE port sequence
    • PoE schedule

Layer 2 Features

  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • High performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • Supports VLAN
    • Port-based VLAN, up to 26 VLAN groups
    • IEEE 802.1Q tagged VLAN
    • Protocol VLAN
    • Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
    • GVRP
    • Voice VLAN
  • Supports Spanning Tree Protocol
    • STP (IEEE 802.1D Spanning Tree Protocol)
    • RSTP (IEEE 802.1w Rapid Spanning Tree Protocol)
    • MSTP (IEEE 802.1s Multiple Spanning Tree Protocol)
    • STP BPDU Filtering, BPDU Protect
  • Supports Link Aggregation
    • IEEE 802.3ad Link Aggregation Control Protocol (LACP)
    • 1 LACP group, up to 2 ports per LACP group 
    • Cisco ether-channel (static trunk)
    • 1  trunk group, up to 2 ports per trunk group 
  • Provides port mirror (many-to-1)
  • Loop detection

Physical Port

  • 8 10/100BASE-TX RJ45 copper ports with IEEE 802.3at/af PoE+ injector function
  • 2 10/100/1000BASE-T Gigabit RJ45 copper ports
  • 2 100/1000BASE-X mini-GBIC/SFP slots, shared with port-9 to port-10
  • Reset button for system factory default

Switching

  • Hardware-based 10/100Mbps, half/full duplex and 1000Mbps full duplex mode, flow control and auto-negotiation, and auto MDI/MDI-X
  • Features Store-and-Forward mode with wire-speed filtering and forwarding rates
  • IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
  • Automatic address learning and address aging
  • Supports CSMA/CD protocol

Power over Ethernet

  • Complies with IEEE 802.3at Power over Ethernet Plus
  • Backward compatible with IEEE 802.3af Power over Ethernet
  • Up to 8 ports of IEEE 802.3af/802.3at devices powered
  • Supports PoE Power up to 30 watts for each PoE port
  • 120-watt PoE budget
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 250m via extend mode
  • PoE Management
    • Per port PoE function enable/disable
    • Per Port PoE operation mode selection
    • Per PoE port power budget control
    • PD classification detection and  PoE consumption usage status
  • Intelligent PoE features
    • PD alive check
    • PoE port sequence
    • PoE schedule

Layer 2 Features

  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • High performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • Supports VLAN
    • Port-based VLAN, up to 10 VLAN groups
    • IEEE 802.1Q tagged VLAN
    • Protocol VLAN
    • Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
    • GVRP
    • Voice VLAN
  • Supports Spanning Tree Protocol
    • STP (IEEE 802.1D Spanning Tree Protocol)
    • RSTP (IEEE 802.1w Rapid Spanning Tree Protocol)
    • MSTP (IEEE 802.1s Multiple Spanning Tree Protocol)
    • STP BPDU filtering, BPDU Guard 
  • Supports Link Aggregation
    • IEEE 802.3ad Link Aggregation Control Protocol (LACP)
    • 1 LACP group, up to 2 ports per LACP group  
    • Cisco ether-channel (static trunk)
    • 1  trunk group, up to 2 ports per trunk group 
  • Provides port mirror (many-to-1)
  • Loop detection

Scroll to Top

The candidate who wants to apply for a job must drop your CV/Resume at hr@ayk.com.pk

X
Contact Us
close slider

CONTACT US